油罐槽車軟管專為公路鐵路槽罐車使用特點設計，柔軟輕便，彎曲自如，適合頻繁彎曲移動使用，
性能，是通用槽罐車軟管。
Oil tanker special hose.The design of oil tanker special hose designed for highway and railway tank car use characteristics.Soft light,supple,suitable for mobile use frequent bending.
The antistatic performance is reliable,the international general tank hose.
凱達多用途復合軟管技術參數
Kaida multipurpose composite hose technology parameters
規格型號 specifications and models | 工作壓力 working pressure | 長度（m）+ 5% length | 使用溫度℃ temperature | 電阻（Ω） resistance | 彎曲半徑 bending radius （mm）+100 | 重量 weight kg/m+1 | |||
（mm) | in | MPa | Psi | 15米 | - 40℃ ~ +130℃ | 碳鋼類 carbon steel | 不銹鋼類 stainless steel | 220 | 1.5 |
DN25 | 1 | 0.6-1.6 | 87-232 | ≤10（Ω） | ≤20Ω | ||||
DN32 | 1¼ | 1.8 | |||||||
DN40 | 1½ | 220 | 2.0 | ||||||
DN50 | 2 | 300 | 2.4 | ||||||
DN65 | 2½ | 2.6 | |||||||
DN80 | 3 | 350 | 3.5 | ||||||
DN100 | 4 | 400 | 5.8 | ||||||
DN125 | 5 | 0.6-1.0 | 87-145 | 12米 | 500 | 6.5 | |||
DN150 | 6 | 570 | 10.5 | ||||||
DN200 | 8 | 800 | 15 | ||||||
DN250 | 10 | 1100 | 22 | ||||||
DN300 | 12 | 1200 | 28 | ||||||
注：本冊工作壓力是在溫度為30℃+2℃時的測試結果。
軟管規格型號均為軟管內徑尺寸，允許誤差+4mm（如內徑有變動，外徑也相應的變動），耐壓拉伸長度為10%。
所有軟管按用戶要求在工廠安裝接頭，接頭可選用法蘭、接頭、螺紋。接頭材質可選用不銹鋼。碳鋼。鋁合金材質。接頭連接的軟管，口徑可做到DN200。
本冊軟管技術參數僅供參考，不同規格。用途。重量。使用壓力與彎曲半徑會有所不同，詳情請向凱達公司咨詢。
Note:this book working pressure is at a temperature of 30℃+2℃test results of.Hose specifications are hose diameter size,permissible error+4mm.（If the inner diameter changes,outer diameter is also a corresponding change）The pressure maximum tension length10%.
All hoses according to user requirements in installation of joint factory.Joint can be selected,quick couplings,threaded flange.Joint material:stainless steel carbon steel.The aluminum alloy material.Quick joint connecting hose,the largest diameter can doDN200.
